Monel Alloys
We distribute and stock high-performance nickel based alloys used
in corrosion and high-temperature applications.
MONEL 400
A nickel-copper alloy with high strength and excellent corrosion
resistance in a range of media including sea water, hydrofluoric acid,
sulfuric acid, and alkalies. Used for marine engineering, chemical and
hydrocarbon processing equipment, valves, pumps, shafts, fittings,
fasteners, and heat exchangers.
UNS: N04400
W.Nr.: 2.4360, 2.4361
MONEL 405
The free-machining version of MONEL alloy 400. A controlled amount of
sulfur is added to the alloy to provide sulfide inclusions that act as chip
breakers during machining. Other characteristics are essentially the
same as those of MONEL alloy 400. Used for meter and valve parts,
fasteners, and screw-machine products.
UNS: N04405
MONEL K-500
A precipitation-hardenable nickel-copper alloy that combines the
corrosion resistance of MONEL alloy 400 with greater strength and
hardness. It also has low permeability and is nonmagnetic to
temperatures as low as -150°F (-101°C). Used for pump shafts,
oil-well tools and instruments, doctor blades and scrapers, springs,
valve trim, fasteners, and marine propeller shafts.
UNS: N05500
W.Nr.: 2.4375
Available Product Forms: Pipe, tube, sheet, strip, plate, round bar,
flat bar, forging stock, hexagon and wire
We distribute and stock high-performance nickel based alloys used
in corrosion and high-temperature applications.
MONEL 400
A nickel-copper alloy with high strength and excellent corrosion
resistance in a range of media including sea water, hydrofluoric acid,
sulfuric acid, and alkalies. Used for marine engineering, chemical and
hydrocarbon processing equipment, valves, pumps, shafts, fittings,
fasteners, and heat exchangers.
UNS: N04400
W.Nr.: 2.4360, 2.4361
MONEL 405
The free-machining version of MONEL alloy 400. A controlled amount of
sulfur is added to the alloy to provide sulfide inclusions that act as chip
breakers during machining. Other characteristics are essentially the
same as those of MONEL alloy 400. Used for meter and valve parts,
fasteners, and screw-machine products.
UNS: N04405
MONEL K-500
A precipitation-hardenable nickel-copper alloy that combines the
corrosion resistance of MONEL alloy 400 with greater strength and
hardness. It also has low permeability and is nonmagnetic to
temperatures as low as -150°F (-101°C). Used for pump shafts,
oil-well tools and instruments, doctor blades and scrapers, springs,
valve trim, fasteners, and marine propeller shafts.
UNS: N05500
W.Nr.: 2.4375
Available Product Forms: Pipe, tube, sheet, strip, plate, round bar,
flat bar, forging stock, hexagon and wire
American Special Metals is an independent distributor, and is not a representative or authorized distributor for any
manufacturer, brand or tradename, trademark listed on this site. All logos, tradenames and/or trademarks belong to their
respective holders.
American Special Metals es un Distribuidor Independiente, tanto el logo, como el nombre comercial y la marca registrada y
patentes de los productos presentados en este sitio de Internet pertenecen a sus respectivos dueños y no a nosotros.
American Especial Metals aclara no ser un representante exclusivo de los nombres comerciales o marca registrada, Todos
los logos, nombres comerciales y/o marcas registradas pertenecen a sus respectivos dueños.
manufacturer, brand or tradename, trademark listed on this site. All logos, tradenames and/or trademarks belong to their
respective holders.
American Special Metals es un Distribuidor Independiente, tanto el logo, como el nombre comercial y la marca registrada y
patentes de los productos presentados en este sitio de Internet pertenecen a sus respectivos dueños y no a nosotros.
American Especial Metals aclara no ser un representante exclusivo de los nombres comerciales o marca registrada, Todos
los logos, nombres comerciales y/o marcas registradas pertenecen a sus respectivos dueños.
 |
 |
 |
 |
 |
 |
 |
| Corporate Headquarters American Special Metals, Corp. 11890 S.W. 8th Street Penthouse VII Miami, Florida 33184-1717 Telephone: (305) 551-4215; Fax: (305) 551-3436 E-Mail: info@americanspecialmetals.com |
Monel, Inconel, Incoloy, and Nilo are Registered Trademarks of
Special Metals Corporation and Its subsidiaries
Special Metals Corporation and Its subsidiaries
|
 | |  | |  | |  | |  | |  | |  | |  |
| Request For Quote Use this form to submit your request for quote Please Review our Privacy Policy. Click Here for Privacy Policy We do not collect personal information for any purpose other than to respond to your Request for Quote |